| Nguồn gốc: | Hà Lan , Trung Quốc |
|---|---|
| Hàng hiệu: | Zhongdong |
| Chứng nhận: | CCC,IEC,VDE,TUV,ISO |
| Số mô hình: | AAC |
| Số lượng đặt hàng tối thiểu: | Có thể thương lượng |
| Giá bán: | có thể đàm phán |
| chi tiết đóng gói: | Trống gỗ |
| Thời gian giao hàng: | 7-30 ngày dựa trên số QTY khác nhau |
| Điều khoản thanh toán: | , L/C, T/T. |
| Khả năng cung cấp: | 500km/tuần |
| Phạm vi ứng dụng: | Truyền trên cao, mặt đất trên cao | Vật liệu: | ACSR |
|---|---|---|---|
| trống đóng gói: | Trống bằng gỗ thép | Tên sản phẩm: | ACSR Thỏ dẫn chó dẫn |
| Kiểu: | dây dẫn trần | Tiêu chuẩn: | IEC, BS, ICEA, ASTM, DIN |
| Làm nổi bật: | galvanized steel bare conductor,IEC 61089 power transmission wire,bare conductor for power systems |
||
The galvanized steel wire strand is manufactured by concentrically stranding single wires helically around a central core.
Available in three galvanizing classes:
The coating weight increases progressively from Class A to Class C, with Class C offering superior corrosion resistance.
![]()
![]()
![]()
![]()
![]()
Q: How does the galvanizing process protect GSW?
A: The hot-dip galvanized coating prevents rust and extends the cable’s lifespan, especially in harsh environments like coastal or industrial areas.
Q: What tensile strength can GSW cables withstand?
A: Typical tensile strength ranges from 1,500 to 4,000 MPa, depending on diameter and strand configuration (e.g., 7/1.57mm).
Q:Can GSW cables be used in underground installations?
A: While GSW is designed for overhead applications, it can be used underground if properly insulated to prevent moisture ingress.
Q: What are the standard diameters for GSW strands?
A: Common diameters include 3/3.05mm, 1/4'', and 3/16'', with customizable lay types (left/right).
Q: How does GSW compare to aluminum conductors?
GSW offers higher strength-to-weight ratio and is often used as a reinforcing core in hybrid ACSR cables.
Q: What maintenance does GSW require?
A: Minimal maintenance is needed due to galvanizing, but periodic inspections for coating integrity are recommended.