xlpe insulated cable
"
4 câble électrique blindé de base STA 0,6/1 kV AL conducteur NAYBY
4 Core STA Armoured Power Cable 0.6/1kV AL Conductor NAYBY APPLICATION The 4 core STA (Steel Tape Armoured) aluminium conductor power cable (NAYBY) is mainly used for low voltage power distribution systems with a rated voltage of 0.6/1kV. It is suitable for transmitting and distributing electrical energy in both industrial and urban networks. CONSTRUCTION Type: NAYBY Conductor: Aluminium (AL) Insulation: PVC Armoured: Steel Tape Armoured(STA) Sheath: PVC CHARACTERISTIC Rated
Cable électrique blindé résistant au feu 0.6 1.0kV à deux cœurs à l'épreuve de la chaleur
Steel Wire Armoured Fire Resistant Cable 0.6/1.0kV Two Core Application Fire resistant cables can be used in several critical buildings where safety against fire is mandatory to reduce the risk of death as: Hospitals & Old people’shomes. Schools & Recreational buildings. Museums & Historical places. Undergrounds & Tunnels. Railways & Airports. Shopping Centers & Malls. Theatres & Cinemas. Hotels & Offices. High-rise buildings Construction Conductor: Plain Annealed
3 câbles d'alimentation à tension moyenne écranés au noyau avec des conducteurs enroulés en PVC
3 core Screened Medium Voltage Cable with PVC Sheathed Stranded Conductors Application Medium voltage power cable for static application in ground, within and outside facilities, outdoor, in cable canals,in water, in conditions where cables are not exposed to heavier mechanical stress and tensile strain. Construction Stranded compacted conductor, triple extruded conductor screen, insulation and insulation screen, copper wire screened, laid-up, PVC bedded, steel wire armoured,
Cable ignifuge de 450 V à 750 V, câble flexible à incendie
CE Certification Fire Resistant Cable Flexible Cable/Rated voltage 450/750V Application For system connection wire of control, signal, protection or measuring with rated voltage up to and including 450/750KV. Construction Conductor: Plain annealed copper (class 2, normal stranded or compact stranded) Fire barrier: Mica tape Insulation: XLPE Filler, binder and inner covering: PP, PET, LSZH Outer sheath: LSZH Technical parameters Single Core Cross section of conductor(mm²)
Cable solaire photovoltaïque sans halogène AC 1,0 kV DC 1,5 kV Cable photovoltaïque de panneau solaire
Solar Cable Halogen Free Photovoltaic Cable AC 1.0/1.0kV DC 1.5kV for Solar Panel Characteristic Duarable Insulation and very nice waterproof quality (IP67) enable for all kinds of wwather. Inner Conductor: Flexible Tinned Copper Wire Dielectric: LSZH Halogen free Copolymer (UV resistant) One side with Male Solar Connector, and the others comes with Female Solar Connectors, with Waterproof IP67 Colored Cable (RED +Black) easy for use, avoid any mixed connected and short
450/750 Fire Resistant Control Cable CU/PVC/STW/PVC NYY NYBY 2-61 Cores
450/750 Fire Resistant Control Cable CU/PVC/STW/PVC NYY NYBY 2-61 Cores APPLICATION This product is suitable for use in control, monitoring circuits, and protection circuits in circuits with a rated voltage of 450/750V and below CONSTRUCTION Conductor C ircular solid copper conductor (A) or circular stranded copper conductor (B) Insulation Polyvinyl chloride (PVC) Filler Polypropylene (PP) m esh f illing r ope Armouring (optional) Galvanized steel tape Outer sheath Polyvinyl
Les câbles de sécurité incendie à tension moyenne avec des conducteurs à chaîne enveloppés en PVC
Medium Voltage Fire Resistant Cable with PVC Sheathed Stranded Conductors Application Fire resistant cables can be used in several critical buildings where safety against fire is mandatory to reduce the risk of death as: Hospitals & Old people’shomes. Schools & Recreational buildings. Museums & Historical places. Undergrounds & Tunnels. Railways & Airports. Shopping Centers & Malls. Theatres & Cinemas. Hotels & Offices. High-rise buildings Construction Stranded co
Cable résistant au feu à faible teneur en fumée, zéro halogène LSZH
Low Smoke Zero Halogen Fire Resistant Cable Fiberglass Braid Wire Application Fire-resistant cables are designed to maintain circuit integrity and continue operating during fire emergencies, ensuring critical systems remain functional. These cables are essential in environments where fire safety and uninterrupted power supply are priorities Construction Conductor: Plain annealed copper (class 2, normal stranded or compact stranded) Fire barrier: Mica tape Insulation: XLPE
Cable solaire en cuivre en conserve XLPO Enveloppe PV H1Z2Z2-K 4 mm 6 mm 10 mm Résistant aux intempéries
Tinned Copper Solar Cable XLPO Sheath PV H1Z2Z2-K 4mm 6mm 10mm Product Presentation H1Z2Z2-K is a harmonized cable type that complies with European standards (e.g., EN 50618). It is specifically designed for use in photovoltaic systems, connecting solar panels, inverters, and other components of a PV installation. The "K" in the name indicates that the cable has a tinned copper conductor, which provides better corrosion resistance. Structure Conductor: Tinned copper, offering
