armoured power cable
"
Özel Logo Düşük Voltajlı Elektrikli Tel Alev Geriletici 3 Çekirdek 0.6/1kV CU/XLPE/ STA/PVC Endüstriyel Kablo
Flame Retardant Low Voltage Cable 3 Core 0.6/1kV CU/XLPE/ STA/PVC Industrial Cable APPLICATION This custom logo 3-core low-voltage industrial cable, rated at 0.6/1kV with a CU/XLPE/STA/PVC structure and flame-retardant performance, is engineered for reliable power transmission and distribution in various industrial scenarios, with the custom logo enabling easy brand identification and product traceability CONSTRUCTION Conductor: Class 1 or class 2 stranded Copper conductor
240 -2000MM2 66kV Yüksek Voltaj Kablo CU XLPE CAS PE PVC LSHF Yeraltı Kablo
240 -2000 MM2 66V High Voltage Cable CU/XLPE /CAS/PE PVC LSHF Underground Cable Application Used for underground power transmission lines; laid on cable ladder, tray, buried direct in the ground or in duct in the ground Construction 1.Conductor 2.Conductor screen 3.XLPE insulation 4.Insulation screen 5.Semiconducting tape 6.Aluminum corrugated sheath 7.PE or PVC outer sheath (Graphite coating or extruded semiconducting) Description Voltage Rating (Uo/U)(Um) : 36/66 kV
XHWW-2 Alüminyum İletici MC Kablo 3 çekirdek 4 çekirdek 600V Alüminyum Tel
XHWW-2 Aluminium Conductor Cable 3 Core 4 Core MC cable Application TypeXHHW-2MC cable is suitable for use as branch,feeder and service power distribution.It is suitable for use in wet or dry locations at temperature not to exceed 90°C.If it should be directly buried in the earth,MC cable with PVC sheathis an optimal choice.Maximum voltage rating for XHHW-2 application is 600Volts . Construction Type XHHW-2 conductors which is constructed with 8000 Series Aluminium Alloy
Çok çekirdekli 1.5mm Düşük Voltajlı Kontrol Kablosu PVC yalıtım Bakır Esnek Kablo
KVV Multi Cores Flexible Control Cable 0.75 1.0 1.5 2.5 Copper Construction 1. Conductor Material: Fine-stranded bare copper (Class 5 per IEC 60228) for high flexibility. Structure: Multiple thin wires tightly bundled to allow repeated bending. 2. Insulation Material: PVC (Polyvinyl Chloride). Function: Provides electrical insulation and mechanical protection. 3. Sheath (Outer Jacket) Material: PVC – Offers abrasion resistance and mild environmental protection. Design: Smooth
Alüminyum alaşımlı iletken orta gerilim kablosu 26KV 35kV XLPE / STA / PVC yalıtım
Aluminium Alloy Conductor Medium Voltage Cable 26/35kV XLPE/ STA/ PVC Application Used for tall building, Hospital, Theatre, Power station, Metro Tunnel or Petrochemical Industry or other special place required for low smoke , zero halogen clean and safe cable. Construction Conductor Conductor Shiel Insulation Metal Shield Layer Filler Binder Tape Armouring Outer sheath Laying Method Pipe laying, trench laying, tunnel laying, vertical shaft and bridge laying, etc. Specificati
Alev geriletici düşük voltajlı kablo 4 çekirdek 0.6/1kV CU/XLPE/ STA/PVC endüstriyel kablo
Flame Retardant Low Voltage Cable 4 Core 0.6/1kV CU/XLPE/ STA/PVC Industrial Cable APPLICATION This product is suitable for use in circuits with a rated voltage not exceeding 0.6/1kV, for the purpose of power transmission and distribution. CONSTRUCTION Conductor: Class 1 or class 2 stranded Copper conductor Insulation: Cross-Linked Polyethylene(XLPE) Inner sheath: Polyvinyl chloride (PVC) Armour: Single core: Steel Tape Multi core: Galvanized Steel Tape Outer sheath:
Yüksek sıcaklığa dayanıklı düşük duman sıfır halogen LSZH Kablo Bakır iletken ekran
High Temperature Resistant Low Smoke Zero Halogen Cable Copper Conductor Screen Application The Cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial,aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short
Alüminyum Elektrik Kablosu 600V 1000V Alüminyum İletici Tel
XLPE Insulated Aluminium Conductor Cable AA- 8000 Series Conductor 600/1000V Application TypeXHHW-2MC cable is suitable for use as branch,feeder and service power distribution.It is suitable for use in wet or dry locations at temperature not to exceed 90°C.If it should be directly buried in the earth,MC cable with PVC sheathis an optimal choice.Maximum voltage rating for XHHW-2 application is 600Volts . Construction Type XHHW-2 conductors which is constructed with 8000 Series
XLPE yalıtım PVC kablosu orta gerilimli tel SWA zırh 8.7KV 15KV MV kablosu
8.7/15KV XLPE Insulation PVC Sheath Medium Voltage Cable SWA Armour Applications This 8.7/15kV XLPE Insulation PVC Sheath SWA (Steel Wire Armoured) Cable is commonly used for: Underground Power Distribution – Reliable medium-voltage transmission in urban and industrial networks. Direct Burial & Duct Installation – Protected by steel armour against mechanical damage and rodent attacks. Industrial & Utility Applications – Suitable for power plants, substations, and heavy
