pvc power cable
"
Медный проволочный экран низковольтный кабель одноядерный 0,6/1 кВ ПВХ изоляционный кабель
Copper Wire Screen Low Voltage Cable Single Core 0.6/1kV PVC Insulated Cable APPLICATION Copper-shielded low-voltage cables are widely used in environments requiring reliable power transmission with electromagnetic interference (EMI) protection CONSTRUCTION Conductor:Circular, solid, compacted or sector shaped stranded Copper or aluminum Insulation:XLPE Filler: Non-hygroscopic material Screen: Copper Wire Binder tape:: Non-hygroscopic material Sheath PVC Characteristics Test
ААК Алюминиевый проводник кабеля XLPE/PVC/STA Среднее напряжение питания кабеля 8,7 15 кВ
AAC Aluminium Conductor Cable XLPE/PVC/STA Medium Voltage Power Cable 8.7 15kV APPLICATION Suitable for urban underground power grids, power station outgoing lines, internal power supply lines of industrial and mining enterprises, etc. CONSTRUCTION Conductor: Round compacted conductors Conductor Shield: Semi conductive shielding material (below 500mm ) Semi conductive tape+semi conductive shielding material (500 mm and above) Insulation: Polyvinyl chloride (PVC) Insulation
3-жильный силовой кабель среднего напряжения от 6 кВ до 35 кВ, бронированный кабель среднего напряжения
6kV to 35kV 3-Core MV Power Cable, Armored Medium Voltage Cable APPLICATION Medium voltage 3-core cables (typically rated from 6 kV to 36 kV) are widely used in power distribution networks due to their balanced phase loading, compact design, and enhanced reliability compared to single-core alternatives. Urban & Industrial Distribution:Deployed in substations, factories, and commercial complexes to transmit power with reduced electromagnetic interference (EMI). Preferred for
Силовой кабель с алюминиевой жилой, одножильный, кабель среднего напряжения для подземной прокладки, для электротехнических целей
Single Core Aluminium Conductor Power cable Medium Voltage Underground Cable for Electrical Use APPLICATION Single-core aluminium conductor power cables with medium voltage ratings (typically 6kV–36kV) are widely used in the following scenarios Power Distribution Networks Industrial Facilities Infrastructure Projects Renewable Energy CONSTRUCTION Conductor: Round compacted conductors Conductor Shield: Semi conductive shielding material (below 500mm2 ) Semi
Кабель среднего напряжения 6.3/11 кВ с алюминиевой жилой, бронированный AWA, огнестойкий силовой кабель
6.3/ 11kV Medium Voltage Cable Aluminium Wire AWA Armoured Flame-retardant Power Cable APPLICATION 6.3/11kV Medium Voltage Cable with Aluminium Wire and AWA Armoured Flame-retardant Power Cable is designed for industrial power distribution, providing mechanical protection and fire safety in critical environments. The aluminium conductor ensures lightweight and cost-effective power transmission, while the AWA (Armour Wire Armour) layer offers robust mechanical protection
N2XC2Y IEC60502 LV кабель медной проводник XLPE изоляция PE кабель питания оболочки
N2XC2Y IEC60502 LV Cable Copper Conductor XLPE Insulation PE Sheath Power Cable APPLICATION For outdoor installation, in the ground, for power stations, industry and distribution boards or subscriber networks, where protection against contact voltage is required in the case of mechanical damage. The core insulation of XLPE allows a higher operating temperature than comparable cable with PVC core insulation. The cables are halogen-free, UV-resistant and particularly resistant
660/1100V низковольтный кабель Vvg Vvgng Vvgng-Frls Медный кабель питания EAC сертифицированный кабель
660/1100V Low Voltage Cable Vvg Vvgng Vvgng-Frls Copper Power Cable EAC Certified Cable APPLICATION Construction, Underground, Industrial, Power Station CONSTRUCTION Conductor: Class 2 stranded Copper conductor Insulation: Cross-Linked Polyethylene(XLPE) Outer sheath: Polyvinyl chloride (PVC) CHARACTERICSTIC Voltage Rating Uo/U: 0.6/1kV M aximum system voltage: 12kV Maximum operating temperature of conductor: +90℃ Operating ambient temperature: -20℃~+45℃ Cable laying
4-жильный бронированный силовой кабель STA 0.6/1кВ с алюминиевым проводником NAYBY
4 Core STA Armoured Power Cable 0.6/1kV AL Conductor NAYBY APPLICATION The 4 core STA (Steel Tape Armoured) aluminium conductor power cable (NAYBY) is mainly used for low voltage power distribution systems with a rated voltage of 0.6/1kV. It is suitable for transmitting and distributing electrical energy in both industrial and urban networks. CONSTRUCTION Type: NAYBY Conductor: Aluminium (AL) Insulation: PVC Armoured: Steel Tape Armoured(STA) Sheath: PVC CHARACTERISTIC Rated
YJLHV62 YJLHV22-18/30kV Люминиевая сплав Проводник XLPE Изоляция ПВХ Оболочка Металлическая лента Бронепровод
YJLHV62 YJLHV22-18/30kV luminium Alloy Conductor XLPE Insulation PVC Sheath Metal Tape Armouring Power Cable Application The AA-8000 series aluminum alloy cables (e.g., AA-8030, AA-8176) are widely used in electrical systems due to their lightweight, cost-efficiency, and superior mechanical/electrical performance compared to pure aluminum. 1. Power Distribution Building Wiring: Branch circuits, feeders, and service entrance cables (NEC Article 310 compliant). Utility Grids:
