xlpe insulated wire
"
中圧低煙ゼロハロゲン電源ケーブル 18/30 36kV 19/33 36KV 3コア
Medium Voltage Low Smoke Zero Halogen Cable 18/30 36kV 19/33 36 KV 3 Core Application Industrial Automation & Process Control : Hazardous Environments Public Infrastructure Building Management Systems Transportation Networks Renewable Energy Characteristics LSZH sheathing resists flame spread and reduces smoke density. Copper/aluminum shielding ensures signal accuracy in noisy environments. Halogen-free construction aligns with IEC 60092 , IEEE 802.3
シングルコア低電圧低煙ゼロハロゲンケーブル LSZH TUV認定
Single Core Low Voltage Low Smoke Zero Halogen Cable LSZH TUV Certificated Application The Cables are suited for use in wet and dry areas, conduits, ducts, troughs, trays, direct burial, aerial supported by a messenger, and where superior electrical properties are desired. These cables are capable of operating continuously at the conductor temperature not in excess of 90°C for normal operation in wet and dry locations, 130°C for emergency overload, and 250°C for short circuit
耐火性 STA 装甲ケーブル 多コア PVC 覆い制御ケーブル
Steel Tape Armoured STA Fire Resistant Flame Retardant PVC Sheathed Control Cable Application Suitable for indoor use, fixed installations, in public areas such as hospitals, hotels, shopping malls, airports, underground railway networks, tunnels, communication centres, and, in general, all places where it is required a high degree of protection of persons and assets or/and with a large number of people and electrical/electronic equipment. Characteristics Rated power
低煙無ハロゲンケーブル LSZH IEC 60502 N2XH 4芯 5芯 多芯 EN 60332-3
Low Smoke Zero Halogen Cable LSZH IEC 60502 N2XH 4 Core 5 Core Multi Core EN 60332-3 APPLICATION Low-smoke zero-halogen (LSZH) cables are widely used in environments where fire safety and air quality are critical CONSTRUCTION C onductor: The first or second type of copper conductor In s u lation:XLPE Sheath: LSZH STANDARD VDE 0276 part 604, VDE 0482-266-2, DIN EN 60332-3 / EN50266-2 ADVANTAGE Halogen-free: Prevents acidic gas formation Low smoke: Maintains visibility in
LVPVC防火用空中電線 ABC電源送電用上空電線
Low Voltage PVC Fire Proof Aerial Bundled Cable ABC Overhead Electrical Lines for Power Transmission Applicatiom Low voltage aerial cable is designed to supply 600/1000-volt aerial service for temporary service at construction sites, as a service drop (power pole to service entrance), as a secondary cable (pole to pole) or street lighting. This over-head cable provides reinforced insulation acc. Characteristics Voltage rating: 1kV Test voltage: 4kV, 5min no breakdown.
IEC標準 装甲のない銅制御ケーブル PVC カーブ マルチコーズ パーソナライズされた長さ
Multi Cores IEC Standard Unarmored Copper Control Cables PVC Sheath Application Industrial Automation & Energy Systems:Deployed in control panels, motor circuits, and power plants for signal transmission and equipment monitoring, Critical for regulating machinery in manufacturing, petrochemical facilities, and renewable energy installations Transportation Infrastructure: Applied in metro systems, railway signaling, and airport control networks to ensure reliable communicati
5コア SWA 装甲電線 1.5-400mm2 IEC 60502-1 BS5467 標準
5 Core SWA Armoured Electrical Cable 1.5-400mm2 IEC 60502-1 BS5467 Standard APPLICATION This product is suitable for power transmission and distribution in lines rated voltage not exceeding 0.6/1kV. CONSTRUCTION Conductor: Class 1/ Class 2 stranded Copper conductor Insulation: Polyvinyl chloride (PVC) Filler ( options): Polypropylene mesh tearing rope I nner sheath: Polyvinyl chloride (PVC) A rmour: Aluminum wire or stainless steel wire ( single core) galvanized steel wire (
炎阻害性 PVC 覆い制御ケーブル 鋼テープ 装甲ケーブル オーダーメイド
Flame Retardant PVC Sheathed Control Cables Steel Tape Armoured Cable Application For system connection wire of control, signal, protection or measuring with rated voltage up to and including 450/750KV. Construction Conductor: Solid or Stranded Copper Conductor Insualtion: XLPE Inner Sheath: PVC Armor: Steel Tape Sheath: Flame Retardant PVC Description Rated voltage 450/750V or less,The control cable can be made as flame retardant when customer required. Laying Temperature
AWA SWA 装甲型アルミニウム電導ケーブル 0.6/1kV IEC60502 NA2XRH
AWA SWA Armoured Aluminium Conductor Cable 0.6/1kV IEC60502 NA2XRH APPLICATION • For fixed installation of the transmission and distribution systems, tunnels and pipelines and other occasions • For situation not suppose to bear the external mechanical force CONSTRUCTION Conductor : Aluminium Insulation :XLPE Filler : LSZH Armour :Single core: AWA (Aluminium wire armour) All other sizes: SWA (Galvanized round steel wire) Sheath : LSZH STANDARD EN 60502-1 CHARACTERISTICS
