xlpe power cable
"
ΣΤΑ Τεθωρακισμένο καλώδιο ηλεκτρικής ενέργειας MV 8.7/15kV Single Core XLPE PVC για κατασκευή υπερυψωμένων υπόγειων σταθμών ηλεκτρικής ενέργειας
STA Armored MV Power Cable 8.7/15kV Single Core XLPE PVC for Construction Overhead Underground Power Stations Application These cables have the advantage of simplicity in construction, lightness in weight; onvenience in application besides its excellent electrical, thermal, mechanical and anti-chemical corrosion properties. It can also be laid with no limitation of level difference along the route. Construction Conductor: Tightly press round conductor Conductor Screen: Semi
Αγωγός Αλουμινίου XLPE SWA LSZH IEC 60502-1 0.6/1kV Καλώδιο NA2XRH
Aluminium Conductor XLPE SWA LSZH IEC 60502-1 0.6/1kV Cable NA2XRH APPLICATION For installation on or under the plaster Fixed installation indoor, in air or concrete. For buildings or industrial plants with a high density of people or valuable assets. No direct burial or installation in water. Outdoor laying only when protected from direct sunlight and other external impacts CONSUCTRUCTION Conductor: Class 2 stranded aluminium conductorInsulation: XLPE (Cross-Linked
Ατσάλινο σύρμα θωράκιση SWA Υψηλής τάσης καλώδιο ηλεκτρικής ενέργειας Χαλκό οθόνη XLPE μονωμένο
Steel Wire Armour SWA High Voltage Power Cable Copper Screen XLPE Insulated Application High voltage cables refer to power cables used for transmitting between 100kV and 1000kV, mainly for power transmission and distribution. Its voltage level ranges are commonly used for long-distance power transmission and voltage level conversion in substations. Construction Conductor: Class 2 copper conductor compacted or segment strand Milliken Conductor Screen: Extruded semi-conductive
1kv CU XLPE PVC καλώδιο χαμηλής τάσης 1x70sqmm IEC60502-1 LV καλώδιο
1kv CU/XLPE/PVC Low Voltage Power Cable 1x70sqmm IEC60502-1 Application 1kv CU/XLPE/PVC Low Voltage Power Cable 1x70sqmm IEC60502-1 UNE 21123 are used for electricity supply in low voltage installation system. They are suitable for installation in indoors and outdoors, in cable ducts, in power and switching stations, local energy distributions, industrial plants, where there is have many movings. Construction Conductor: Class 1 or class 2 stranded Copper conductor Insulation
69kV Χαλκονήματος Εικονικό Διάφραγμα HV Καλώδιο ρεύματος IEC 60840 Standard XLPE Μόνωση
69kV Copper Wire Screen High Voltage Cable for IEC 60840 standard Application Cables are suitable for use in high voltage transmission networks, in systems of rated voltages from 60 kV grade up to and including 69kV grade. Construction Stranded circular or segmental (Milliken) compacted copper conductor, extruded semi-conducting layer as a conductor screen, XLPE insulation,extruded semi-conducting layer as an insulation screen, semi-conductive swelling tape, helically applied
Κεφάλαιο υψηλής τάσης 2XS(F)2Y A2XS(F)2Y 110kV
High Voltage Cable 2XS(F)2Y, A2XS(F)2Y 110kV Power Cable Application The 2XS(F)2Y cable is a type of power cable with specific design features, including cross-linked polyethylene (XLPE) insulation and a flame-retardant sheath. It is commonly used in the following applications: Industrial Power Distribution: Suitable for fixed installations in industrial plants, manufacturing facilities, or workshops due to its high mechanical strength and resistance to harsh environments.
3.6/6kV26/35kV καλώδιο μέσης τάσης XLPE μονωτική μεταλλική ταινία θωράκιση καλώδιο ισχύος
3.6/6kV～26/35kV Medium Voltage Cable XLPE Insulation PVC Sheath Metal Tape Armouring Power Cable Application Suitable for urban underground power grids, power station outgoing lines, internal power supply lines of industrial and mining enterprises, etc. CONSTRUCTION Conductor: Round compacted conductors Conductor Shield: Semi conductive shielding material (below 500mm Semi conductive tape+semi conductive shielding material (500 mm 2 and above) Insulation: Polyvinyl chloride
Single Core HV High Voltage Power Cable 2XS(FL)2Y CU/XLPE/CWS/STA/PVC
Single Core HV High Voltage Power Cable 2XS(FL)2Y CU/XLPE/CWS/STA/PVC APPLICATION Urban underground networks (e.g., substation connections, industrial power distribution) Harsh environments requiring robust mechanical and chemical protection CONSTRUCTION Conductor: Stranded circular or segmental (Milliken) compacted copper conductor Conductor shield: Semi-conductive shield Insulation: Cross-Linked Polyethylene(XLPE) Insulation shield: Semi-conductive shield Metal
ACSR Αυτοφερόμενο ABC Καλώδιο 0.6/1kV XLPE Μονωμένο Εναέριο Δέσμιο Καλώδιο
ACSR Self-supporting ABC Cable 0.6/1kV XLPE Insulated Aerial Bundled Cable This self-supporting aerial bundled cable features XLPE insulation and is designed for reliable overhead power distribution in various applications. Applications Primary and secondary distribution networks Industrial power supply lines Renewable energy projects (solar/wind farm connections) Infrastructure developments requiring reliable overhead cabling Installation is optimized for cost-efficiency in
